Filter
Top Products
IP camera
Zoom in Display
Step 1. Place the mouse cursor over the Liveview image.
Step 2. Right click and choose Zoom on the menu
Step 3. Use cursor to box the area to be zoom, now area boxed is enlarged on the Liveview
area.
Step 4. Resume original size with Step 1 & Step 2
Motion Detection Setup
You can also use right click control to set two predefined motion detection areas,and set
motion detection levels for each area. Right click on the image to display the drop down
menu and select on the Motion detection option with the mouse. Motion
detection must be enabled ont he alerts page for motion detection to operate.
Click 1 to set motion detection area 1. Use the mouse to draw a square on the screen. Click
and hold the left mouse button and drag the square across the area to be monitored.
Repeat the procedure to set area 2. This function can be enabled in 640x480 and 320x240
display mode. Whole the image area is detected when in 160x120 display mode.
Click Motion Detect Set to set a sensitivity level for each area, 15 is most sensitive, 1 is least
sensitive.
Enable motion detection on the alerts page, see "Event Triggling" for details.