Filter
Top Products
CONFIGURATION GUIDE
CONFIGURATION WITH WEB BROWSER
The GXW-410x has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow a user to configure the IP phone through any common web browser.
Examples of GUI interfaces can be downloaded @
http://www.grandstream.com/user_manuals/GUI/GUI_GXW-410x.
A
CCESSING THE WEB CONFIGURATION MENU
1. Connect the Power to the GXW-410x unit.
2. Connect an Ethernet cable between the WAN port on GXW-410x to your PC.
3. You will have to assign a dummy IP with the same subnet as the GXW IP Address, which is
192.168.0.160 by default. So, set an IP address like 192.168.0.x for your PC.
4. Launch web browser and type
http://192.168.0.160 at address of web browser. This connects you
to the GXW-410x web server.
You may choose to use DHCP or PPPoE connection or another static IP address according to your local
network environment.
The Gateway Web Configuration Menu can be then accessed by the following URI:
http://Gateway-IP-
Address where the Gateway-IP-Address is the IP address of the Gateway.
NOTE: To access the configuration page, type the GXW IP address into the browser, stripping out the
leading “0” because the browser will parse in octet. e.g. if the IP address is: 192.168.001.014, please type
in: 192.168.1.14.
Grandstream Networks, Inc. GXW-410x User Manual Page 12 of 37
Firmware 1.0.0.53 Updated: 04/2007