Filter
Top Products
END USER CONFIGURATION
Once this HTTP request is entered and sent from a Web browser, the GXW-410x will respond with a login
screen. There are two default passwords for the login page:
User Level: Password: Webpages allowed:
End User Level 123 Only Status and Basic Settings
Administrator Level admin All pages can be browsed.
F
IGURE 4: SCREEN-SHOT OF GXW-410X LOG-IN SCREEN
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
After login, the next configuration page is the Basic Configuration page, explained in detail in Table 6:
Web Log-in Definition.
T
ABLE 6: WEB LOG-IN DEFINITIONS (BASIC SETTINGS PAGE)
Web Access
Select HTTP or secure HTTPS protocol for Web Access
Web Port
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for
customizable web port.
End User Password
This contains the password to access the End User Web Configuration Menu
(Status and Basic Settings). This field is case sensitive with a maximum length
of 25 characters.
IP Address
There are two modes to operate the GXW-410x:
DHCP mode: all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The GXW-410x acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The GXW-410x will
establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields.
Grandstream Networks, Inc. GXW-410x User Manual Page 13 of 37
Firmware 1.0.0.53 Updated: 04/2007