Filter
Top Products
17
Installation
3.4 Mounting the Digital Gateway
The digital gateway is supplied with a mounting clip for mounting to a wall or other flat
surface. See Figure 10 for dimensions. Use an appropriate fastener to secure it to the wall,
see Figure 11. After the sensor is wired to the digital gateway and the two halves are
threaded together, place the mounting clip over the center of the digital gateway and
squeeze the clip together to secure.
Figure 10 Digital Gateway Dimensions
Figure 11 Mounting the Digital Gateway
1. Mounting Clip 3. Hex Nut, ¼-28
2. Screw, pan head, ¼-28 x 1.25-in. 4. Mount clip, insert digital gateway, squeeze clip closed.
184.15 mm (7.25 inches)
34.29 mm
(1.35 inches)