Filter
Top Products
SKU 66550 For technical questions, please call 1-800-444-3353. Page 8
power light on top of Control Handle
will be lit. Use this dial to adjust the
brightness of LEDs near Camera.
Slide ON/OFF switch on right side of 3.
Monitor (3) to “ON” position. Press
the POWER button on Monitor.
Power Light on Monitor will be green
and Monitor will display live camera
image.
Power Light
Power Button
Orientation Control
Brightness Control
Contrast Control
Monitor
4. Use buttons on Monitor to adjust
brightness, contrast and orientation.
Bend Camera cable as needed to 5.
adjust access to different locations.
Use accessories as needed to see or 6.
retrieve small items.
To prevent accidents, turn off all 7.
power to components after use.
Clean, then store the tool indoors out
of children’s reach.
To Use With T.V. or Monitor
The Inspection Camera may be used
with a T.V. or Monitor by connecting
the mini plug of the Extension Cable
(9) to the video “OUT” jack. Next
connect the RCA plug to the video
“IN’ jack on your T.V. or Monitor.
In this mode the Monitor (3) must
be removed from the camera. Turn
the Monitor (3) “ON” and turn the
camera “ON” and the picture will
be transferred to the T.V./Monitor
remotely.
REV 09k