Filter
Top Products
91
H4D
•
Sound
:
The H4D uses audio feedback to help let you know if each
new image is exposed correctly. This is described in
Standard
Instant Approval Workow.
This menu item has
Volume
(choose between
High, Low
and
O
),
Key Click
(choose between
On
and
O
)
and
Exposure
Warning
(choose between
On
and
O
).
•
Date & Time
:
The H4D has an internal clock that keeps track of the date and
time. This information is used to mark each shot with the date
and time at which it was taken. It is also used to label batch-
es with the date on which each batch was created. (See note
under ‘General overview of sensor unit’ about keeping the inter-
nal battery charged to maintain Date and Time settings
).
•
Display
:
This feature also sets the level of
Contrast
(on a scale of
1-10
)
on the display. Usually, you should leave this set to the default
level of 5; however in some viewing environments and/or with
some types of images you may wish to increase or decrease
this value. A value of 10 provides maximum contrast; a value
of 0 provides no contrast (a black screen). You can also help
save battery power by using a low value here.
This feature also sets the
Brightness
(on a scale of
1-10
) on the
display. This sets the brightness shown on the screen. Usually,
you should leave this set to the default level of 5, however
in some viewing environments and/or with some types
of images you may wish to increase or decrease this value.
A value of 10 provides maximum brightness; a value of 0
provides minimal brightness. You can also help save battery
power by using a low value here.
Setting the options under the user interface menu
Each of the above items can be set by similar menu navigation.
Language
,
Power Down
and
Mark Overex
can be set immediately
by the
+
or
–
button while
Sound
,
Date & Time
and
Display
require another move to sub menu for nal choice.
Proceed as follows:
1. Press the menu (
MENU
) button to open the menu.
2. Use and to select the
SETTINGS
sub-menu.
3. Press to open the
SETTINGS
menu.
4. Press to select the
USER INTERFACE
sub-menu.
5. Use and to select the required item.
Press either the
+
or
–
button to make the new settings in
the case of
Language
,
Power Down
and
Mark Overex
or press
again to access
Sound
,
Date & Time
and
Display
.
6. Press the
EXIT
button again to save the new settings and
close the menu.
1 2
3 4
5 6