Filter
Top Products
48 hp photosmart 720 user’s manual
4 When the unload screen on the computer says Finished,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE To unload the camera images to a computer that does
not have the HP Photo & Imaging software installed on it,
switch the camera to Disk Drive in the USB Configuration
menu found in the Setup menu. This allows the camera to
appear as another disk drive on the computer.
Printing images
NOTE You can also use the optional HP Camera Dock to do
this task. See Appendix B: Camera dock on page 73.
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP DeskJet or
Photosmart printer that has a USB connection, then print
images selected from the camera Share menu or all images in
the camera.
1 Your camera came with a special USB
cable for connecting the camera
directly to a printer.
2 Connect the square end of the USB
cable to the printer.
3 Open the memory card door on the
side of the camera and connect the
small end of the USB cable to the USB
connector on the camera.
4 Adjust the settings in the Print Setup
menu on the camera to complete the printing process.