Filter
Top Products
My image is too bright.
● Turn the flash off (see Setting the flash on page 15).
● Move back from the subject and use zoom.
● Adjust Exposure Compensation (see Exposure Compensation under Using the
Capture Menu on page 17).
My image is too dark.
● Wait for natural lighting conditions to improve, use the flash (see Setting the flash
on page 15), or add indirect lighting.
● Adjust Exposure Compensation (see Exposure Compensation under Using the
Capture Menu on page 17).
● If the subject you are trying to capture is outside the flash range (see Flash working
distance under Specifications on page 42), turn off the flash. This causes a
longer exposure time, so use a tripod or hold the camera steady.
My image is grainy.
● Use a lower ISO Speed setting (see ISO Speed under Using the Capture Menu
on page 17).
● Add indirect lighting, use the flash (see Setting the flash on page 15), or wait for
natural lighting conditions to improve.
● You may have zoomed in too far using digital zoom (see Digital zoom on page 14).
● If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory.
The Power light is on but the Image Display is off, or the camera seems stuck and
won't operate.
●
Press Live View/Playback
to reactivate the Image Display.
● Reset the camera (see Resetting the camera on page 32).
The camera responds sluggishly when trying to review images.
See Storage on page 42 and Memory capacity on page 43 for tips about memory
cards.
Video recording terminates abruptly. The video is saved successfully, but it is
shorter than expected.
Replace your memory card with a faster card. Look for cards marked High Performance,
Pro, Ultra, or High Speed.
Video recording terminates abruptly and the video will not play back.
Reformat the card (see Install and format an optional memory card on page 8).
The camera gets warm (or even hot) to the touch.
This is normal. However, if anything seems out of the ordinary, turn off the camera,
remove it from AC power (if connected), and allow the camera to cool. Then examine
the camera and the batteries for signs of possible damage.
Chapter 8
34