Filter
Top Products
Charge the batteries
Charge the batteries using the charger that came with your camera.
1. Plug the charger in to an electrical outlet, then insert
rechargeable NiMH batteries into the charger as shown.
2. The charger's indicator light blinks when the batteries are
charging, then turns on solid when charging is complete
(see Recharging NiMH batteries on page 40 for
information on charging times).
Batteries and the charger may get warm while the batteries
are charging. This is normal.
Although batteries can be left in the charger without harm, we
recommend you do not store batteries in the charger. See Managing batteries
on page 38 for information about safe handling and storage of rechargeable NiMH
batteries.
To fully activate your new NiMH batteries, charge them overnight in the charger even if
the charger indicates that the batteries are charged.
Note You can also charge batteries in the camera using an optional HP AC
power adapter, or in the extra battery bay of an optional HP Photosmart premium
camera dock.
Install the batteries
1. Open the Battery/Memory card door by sliding the
latch as indicated on the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card door.
Note Turn the camera off before removing the
batteries. If using rechargeable NiMH batteries,
fully charge the batteries before using them the
first time (see Charge the batteries on page 7).
Turn on the camera
To turn on the camera, press the button.
Choose the language
Use to choose the language you want, then
press
.
To change the language later, use the Setup menu (see
Using the Setup Menu on page 31).
HP Photosmart M627 Digital Camera 7