Filter
Top Products
10
2.5 Turning the Digital Camcorder On
To power on the camera: •
Flip out the LCD panel; the camera will turn on automatically.1.
If the LCD panel is ipped open and the camcorder is off, press [Power Button2. ] for one second.
2.6 Conguring the Initial Date and Time Setup
The time setting screen automatically appears to allow you to setup date and time:•
Operation Display Screen
Touch Year, Month, Day, Hour, Minute, and AM/PM to set.1.
Adjust the numeric value by touching 2.
/
Touch the [OK] icon to validate the setting.3.
Touch the Exit icon 4. (
) to exit.
Note
if the Date and Time Setup screen does not appear when the camcorder is initially powered up, •
please follow the setup procedure on page 29.
2.7 Getting Started
To record video: • Press [Video Button] to record video. To stop recording, press it again.
To pause recording: • Press [Pause Button] to pause recording. To continue the recording, press it
again.
To take a • photo: Press [Photo Button] to take photo.
To view stored videos and photos: Press [Playback Button] or touch •
on the LCD monitor to
switch to the Playback mode.
2.8 Turning the Digital Camcorder Off
To turn off the camera: You can either press [Power Button] for one second, or you can close the •
LCD panel back to its original position.