GAIN MENU
……Gain mode setting
…… Fixed amplification setting
…… Maximum amplification setting
Gain setting
1) Press the Set button for at least 2 seconds to display the main
menu on the monitor screen.
2) Select GAIN by Up (Down) button, and display GAIN MENU
by Right button.
(1)MODE:Set gain mode.
PRESET:Preset gain mode
AGC:Automatic gain mode
(2)PRESET GAIN:Set gain value of manual.
0dB to 48dB
(3) AGC LIMIT: Set maximum of the automatic gain.
0dB to 48dB B
(1) MODE:Set white balance mode
ATW:Automatic whilte balance.
Manual:Set white balance.
(2) ATW RANGE: Set Range of Following color temperature
NORMAL:2500K to 8000K.
SPECIAL:2500K to 8000K+special light
(Sodium lamp、mercury lamp)
(3) AWB: One push automatic white balance
A white balance is adjusted with auto after pressing the right
button. The value of R and G GAIN is updated and it fixes to
MANUAL.
(4) R GAIN:White balance hand regulation of R gain
-128 to 0 to 127
This operates, only when a white balance is a manual.
(5) B GAIN:White balance hand regulation of B gain
-128 to 0 to 127
This operates, only when a white balance is a manual.
(6) WHITE GATE: Set auto level control of white balance.
OFF/ NO.1 to NO.9
WHITE BALANCE MENU
……Mode setting
……Range of Following color
temperature setting
……One push setting
……Manual setting(R gain)
……Manual setting (B gain)
……
Auto level conrol gate setting
White balance setting menu
SUB MENU
(1) CHROMA:Chroma level setting
-128 to 0 to 50
Choroma level is fixed to the value of “-128”, and cannot
be adjusted, at time of B/W MODE.
(2) DETAIL: The optimum detail levelseting
-128 to 0 to 127
(3) PEDESTAL:Set black level.
-28 to 0 to100
(4) GAMMA:
Gamma correction setting
ON : Gamma ON
HIGH : Gamma ON (High)
OFF : Gamma OFF
(5) KNEE MODE: Mode select
OFF : Not use KNEE function
ON : Use Knee fnction
(6) KNEE: KNEE function setting when KNEE MODE is
“ON”.
SLOPE 1 : KNEE slope 1 0 to 255
SLOPE 2 : KNEE slope 2 0 to 255
POINT 1 : KNEE point 1 0 to 255
(64 = 100%)
POINT 2 : KNEE point 1 0 to 255
(64 = 100%)
(7) MASKING MODE: Mode select
PRESET : Use a standard preset
VARIABLE : Use a user setting mode
(8) MASKING: Masking function setting when MASKING
MODE is “VARIABLE”.
(SAT): Degree of saturation of the color
R : Red mask setting 1 to 255
Y : Yellow mask setting 1 to 255
G : Green mask setting 1 to 255
C : Cyan mask setting 1 to 255
B : Blue mask setting 1 to 255
M : Magenta mask setting 1 to 255
(HUE): Color phase
R : Red mask setting 0 to 255
Y : Yellow mask setting 0 to 255
G : Green mask setting 0 to 255
C : Cyan mask setting 0 to 255
B : Blue mask setting 0 to 255
M : Magenta mask setting 0 to 255
……Chroma level setting
……Detail correction setting
……Black level setting
……Gamma correction setting
……KNEE mode setting
……KNEE function setting
……Masking mode setting
……Masking function setting
8
POINT 1 POINT 2
SLOPE 1
SLOPE 2