Hitachi VM-E53A Camcorder User Manual


 
Getting Started
23
Using Alternative Power Sources
Using the AC Adapter/Charger
Please ensure that the CAMERA/OFF/VIDEO switch is in the OFF position whenever
attaching or detaching any power supply (ie. battery, AC adapter/charger, etc.)
1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide
blade fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the
blades fully into the outlet either contact an electrician to replace your obsolete outlet, or
use a polarized cord or outlet accessory.
2. Align the arrow on the external power adapter with the guide arrow on the
camera/recorder.
3. Hold the external power adapter firmly against the camera/recorder while sliding it
towards the right of the machine.
4. Connect the external power adapter plug to the DC OUTPUT jack of the AC
adapter/charger.
Note: The AC adapter/charger can be used around the world. An AC plug adapter is
required in some foreign countries. If you need one purchase it at your Hitachi distributor.
Note: The battery level indicator sometimes displays partial charge symbol when using the
AC adaptor/charger. Ignore this indicator when using the AC adaptor/charger.
Using Alkaline Dry-Cell Batteries
The camera/recorder can be powered with six alkaline dry-cell batteries inserted into the
optional battery case (Hitachi VM-BP86C) which can be attached to the
camera/recorder. The operation time of the camera/recorder depends on the type of
alkaline batteries used. Six special high-quality alkaline batteries can power the