Hitachi VM-H620A Camcorder User Manual


 
Basic Techniques - 29 -
Basic Techniques
The batteries are in place and charged, the date and time are set, and you are familiar with the
controls. Is time to make a recording. Basic recording is easy and simple. Hooking up the
camcorder to your TV is not complicated but give yourself plenty of time to ensure connections
are correct.
This section guides you through basic recording and playback. Practice the basic techniques of
recording and playback on something unimportant such as traffic or a short tour of your backyard.
Once familiar with how the machine works you can move to the more sophisticated features with
less stress.
Let's get started!
Making a Basic Recording
The Hitachi VM-H620A/H720A uses PROGRAM AE auto exposure that automatically selects the
optimum shutter speed (either 1/60, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500,
1/2000, or 1/4000 of a second). The iris adjusts automatically in response to shutter speed.
1. Connect the camcorder to a power source ("Loading Batteries; Camcorder Batteries," p 15,
"Using Alternative Power Sources," p.17).
2. Insert an 8mm cassette ("Inserting and Removing Cassettes," p.18).
3. Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM.
appears and
the camcorder is now ready to record.
4. Use the diopter control to match the viewfinder's focus with your eyesight.
5. When you are ready to record press the Start/Stop button. REC appears in the viewfinder and
the camcorder records the picture you see in the viewfinder.
Note: TAPE flashes in the viewfinder when the tab on the side of the cassette is completely
visible.
6. To stop recording press the Start/Stop button and REC disappears from the viewfinder
replaced by
. This places the camcorder in standby.
Note: TAPE END flashes in the viewfinder when about 3 minutes or less remain of the tape
cassette.
Note: If the camcorder is left in record/pause mode for more than 5 minutes, the camcorder