Filter
Top Products
PhotoBooth Assembly
Page 9
3. Attach the flash unit to the half pole using the knurled clamp screw. Tighten securely.
4. Slide the half pole onto the L-bracket and adjust as needed.
5. Adjust the half pole above the Mondopad panel, allowing room for the camera.
6. Adjust the angle of the flash unit and softbox to accommodate the camera and your
situation, using the flash unit tilt head.
7. Plug the power cord into the flash unit and route through the mobile cart post.
8. Plug the other end of the power cord into a power strip or power outlet.
Knurled Clamp Screw
Tilt Head