Filter
Top Products
9
2.4G REMOTE OPERATIONS
Using 2.4G remote
1) To start and stop video recording, press the video record button
2) To take a photo, press the photo button.
3) To turn camera off, long press (about 3 seconds) the Power OFF button.
4) To replace batteries, please unscrew back cover and remove spent batteries
and replace with two fresh CR2016, 3V batteries.
5) IMPORTANT NOTE: Wireless transmission will not work underwater.
Wireless remote is for above water use only.
Matching replacement 2.4G remote to camera
1) Camera must be off.
2) Press and hold both video record and photo buttons at the same time
until the red LED starts to blink.
3) Turn camera on.
4) Remote is matched to camera after red LED stops blinking.
CAMERA SETTINGS
To change camera settings, press the MENU button and press UP or DOWN button to scroll through main
menu selections and press OK button to enter sub-menu selections. Shown below are the three main menu
selections screens.
VIDEO Menu:
In video mode, press MENU button. With VIDEO menu icon highlighted, press OK button to enter video
settings sub-menu. Use the UP or DOWN button to scroll through the sub-menu and press OK button to
select from QUALITY, RESOLUTION, MOTION DETECTION, VIDEO DURATION, LOOP VIDEO, UPSIDE
DOWN, MUTE, IMAGE EFFECT, SCENE MODE, FLICKER, CONTRAST, SHARPNESS, ISO, WHITE
BALANCE, EXPOSURE VALUE, and AF MODE. After selecting sub-menu, use UP or DOWN to scroll
through choices, press OK button to select and press MENU button 2 times to go back to main screen.
1) VIDEO QUALITY: Setting sub-menu choices are explained in chart below.
SETTING
DESCRIPTION
Super Fine
Produces best quality video for selected resolution.
Fine
Produces good quality video for selected resolution.
Normal
Produces regular quality video for selected resolution.
Video record
ON / OFF
Power OFF
Photo