Filter
Top Products
5
GETTING TO KNOW YOUR CAMERA
GETTING STARTED
Opening the housing:
Follow the steps below to open the housing. Sometimes a vacuum seal may occur, use thumb press system
to open.
IMPORTANT: Before each use, clean and maintain all O-rings for parts that have been opened by removing any
dirt, sand and other debris and lightly lubricating with silicone grease as needed to prevent drying and cracking.
Make sure to remove all excess grease before use. Excess grease can cause leakage and failure of seal.
Resetting camera: If camera becomes unresponsive, insert end of paper clip into (15) RESET hole and gently
push to reset camera.
(1) POWER
(7) Recording
indicator LED
(5) Wrist
strap
attachment
point
(4) LOCK
(3) LED
(2) SHUTTER
(8) UP,
ZOOM out,
LCD icons off,
LCD off
(9) DOWN, ZOOM in,
Front LED off/on
(10) OK
(11) MODE
(12) MENU
(21) O-ring
(20) LCD
(19) Mini USB HDTV
out port
(18) Micro SD card port
(17) Thumb
press opener
(16) EZ open tabs
(14) VGA TV out port
(13) Micro USB port
(6) Tripod mount
(15) RESET
Pull (4) lock
Place against
(16) EZ open tabs
Push (17) thumb
press opener