Filter
Top Products
13
5) TIME LAPSE: Allows the camera to continually take a photo with delays between each photo
corresponding to selected time interval in seconds. This produces a high quality time lapse effect. The
setting choices are OFF, 2 sec, 3 sec, 5 sec, 10 sec, 30 sec, and 60 sec.
6) UPSIDE DOWN: This setting allows video to be played back in correct orientation for photos that are
taken with camera mounted upside down. Setting choices are ON to activate and OFF to deactivate feature.
7) IMAGE EFFECTS: This setting allows selection of image altering effects as shown below.
EFFECT
DESCRIPTION
OFF
Deactivates Image effects.
ART
Changes background sharpness and contrast.
SEPIA
Adds yellow-brown tint to video/photo.
NEGATIVE
Reverses imagery to make it appear like a film negative.
BLACK & WHITE
Removes color to create a monochrome video/photo.
VIVID
Enhances colors.
8) SCENE MODE: This setting selects the below scene modes.
SCENE MODE
SELECTION
DESCRIPTION
AUTO
Select AUTO when you want to record videos or photos without manual
adjustments described below.
NIGHT
SCENE
For video/photography in low light and at night. Due to slower shutter speed,
mounting on stable object such as a tripod is recommended.
SPORTS
For video/photography of fast moving subjects or during action activities. Camera
uses faster shutter speeds to improve imagery.
LANDSCAPE
For video/photography of distant subjects such as mountains, cityscape, etc.
SUNSET
For video/photography of scenes that include sunrise or sunset in the background.
Camera uses faster shutter speed to improve imagery.
SAND &
SNOW
For video/photography where bright background causes subject to appear dark
(silhouetted). Camera uses slower shutter speed to improve imagery.
SPOTLIGHT
For video/photography where bright spotlight causes subject to appear too bright.
Camera uses faster shutter speed to improve imagery.
DIVING
Activates an electronic red filter to add back warm colors while diving at depths
between20’-50’/ 6 M-15 M in salt water. Below 50’/15 M, it is recommended to
deactivate DIVING mode and use a physical red filter such as Intova IFRED SP1.
9) FLICKER: This setting allows the camera to be adjusted to AUTO, 60Hz or 50Hz to prevent video
flickering caused by fluorescent lights. For USA, the setting is 60Hz.
10) CONTRAST: This setting increases or reduces the difference between dark and light areas. Default
setting is STANDARD. To make dark areas blacker and light areas brighter in videos/photos, select
ENHANCE. To make dark areas less black and light areas darker, select SOFT.
11) SHARPNESS: This setting increases or decreases video/photo sharpness. Default setting is
STANDARD. Select SHARP to sharpen or SOFT to blur.
12) ISO: This setting adjusts the camera’s sensitivity to light. A higher ISO value will result in a lighter
video/photo and is useful in low light conditions. The choices are AUTO, 100, 200, 400, and 800.