Filter
Top Products
- 21 -
CV-M530/531
10. Specifications
Scanning system CCIR 625 lines EIA 525 lines
25 frames/sec. 30 frames/sec.
CCD sensor Monochrome 1/2" Hyper HAD IT CCD
Sensing area 6.6 mm (h) x 4.8 mm (v)
Effective pixels 752 (h) x 582 (v) 768 (h) x 494 (v)
Elements in video output 737 (h) x 575 (v) 758 (h) x 486 (v)
Cell size 8.6 (h) x 8.3 (v) µm 8.4 (h) x 9.8 (v) µm
Resolution (horizontal) 560 TV lines 570 TV lines
Resolution (vertical) 575 TV lines 485 TV lines
Sensitivity on sensor 0.05 lx
S/N ratio >56 dB (AGC off, Gamma 1)
Video output Composite VS signal 1.0 Vpp, 75 Ohm
Gamma 0.45 – 1.0
Gain Manual – Automatic. 0 to +15 dB by potentiometer or AGC
Scanning 2:1 interlace – non-interlace
Accumulation Field – frame
Synchronization Int. X-tal. Ext HD/VD or random trigger
HD sync. input/output 4V, 75 Ohm*
VD sync. input/output 4V, 75 Ohm*
Trigger input 4V, 75 Ohm*
Trigger input duration >HD interval
WEN output (write enable) 4V, 75 Ohm
EEN output (exposure enable) 4V, 75 Ohm
Pixel clock output (optional) 4V, 75 Ohm sine
Normal shutter Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Edge pre-select shutter 1/60(1/50), 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Pulse width controlled shutter >1 H (64 µsec.) to <60 msec.
Start/stop trigger shutter 1/77 sec to 1/10,000 sec.
Long time exposure 1 field to ∞. Duration between ext. VD pulses
Operating temperature -5°C to +45°C
Humidity 20 – 80% non-condensing
Storage temp./humidity -25°C to 60°C/20 - 90%
Power 12V DC ±10%. 2.5W
Lens mount C-mount
Dimensions 40 x 50 x 80 mm (HxWxD)
Mass 230 g
* HD sync., VD sync./(Trigger) input or output by internal jumpers.
Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by
internal jumpers. Factory setting: 75 Ohm terminated.
Note: Above specifications are subject to change without notice.
10.1. Spectral Sensitivity
400 500 600 700 800 900
Wave length (nm)
1.0
0.8
0.6
0.4
0.2
0.0
Relative response
1000