Filter
Top Products
8
3. Connect the camera cable to the TV, VCR or DVR
by connecting the 3-Wire adapter cable to the end
of the 60 ft. cable coming from the camera. (See
diagram). Locate the connector on the 3-Wire
adapter labeled ‘power’ and plug in the AC adapter.
Insert the yellow plug to the video jack and the
white plug to the left/mono audio jack on the TV,
VCR or DVR.
4. Switch on the power to the TV, VCR or DVR.
Select appropriate AV input on TV, VCR or DVR.
(Refer to “Connecting to a TV” or “Connecting to a
VCR or DVR” sections.)
5. Adjustments can now be made to the camera
viewing angle by rotating the camera head or
desktop mount.
Wall Mount:
1. Disconnect the camera’s cable.
2. Unscrew the camera from the
desktop base and screw on to the
wall mount bracket.
3. Drill three 1/8” holes in mounting
location and insert wall anchors
provided. Position wall bracket over
the anchors and install screws,
or screw directly into a stud.