Filter
Top Products
9
4. Run the 60’ cable from the camera’s location to
the location of the TV, VCR or DVR. Use the cable
clips provided to keep the cable in place. (See Notes
on Cable Installation.) Do not run cable inside wall;
Take care not to pierce, puncture or cut the cable
when securing.
5. Connect the camera cable to the TV, VCR or DVR
by connecting the 3-Wire adapter cable to the end
of the 60 ft. cable coming from the camera. Locate
the connector on the 3-Wire adapter labeled
‘power’ and plug in the AC adapter. Insert the
yellow plug to the video jack and the white plug to
the left/mono audio jack on the TV, VCR or DVR.
6. Adjustments can now be made to the camera
viewing angle by loosening the adjustment knob
and tilting and rotating the camera head.