JVC 0206ASR-NF-VM Camcorder User Manual


 
EDITING
44 EN
MasterPage: Left
[A] Using USB cable
It is possible to transfer still images stored on a
memory card to a PC.
[B] Using DV cable
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
provided software, software equipped with the
PC or commercially available software.
If you are using a Windows
®
XP, you can use
Windows
®
Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows
®
Messenger.
NOTES:
Refer to SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE for the bundled software
and drivers.
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
pg. 15)
Never connect the USB cable and the DV
cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
The date/time information cannot be captured into
the PC.
Refer to the instruction manuals of the PC and
Software.
The still images can also be transferred to a PC
with a DV connector-equipped capture board.
The system may not work properly depending on
the PC or capture board you are using.
Connection To A Personal Computer
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
Connect the DV cable rst to the PC, and then
to the camcorder.
Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
[A] Using USB cable
To USB
PC
PC with DV connector
USB cable
(provided)
To DV IN/OUT
[B] Using DV cable
To USB
connector
To DV connector
Core lter
Core lter
DV cable
(optional)
OR
Core lter
USB and/or appears on the LCD
monitor while the PC is accessing data in the
camcorder or the camcorder is transferring a
le to the PC.
NEVER disconnect the USB cable while
is displayed on the LCD
monitor since this can result in product
damage.
GR-D390US.book Page 44 Wednesday, June 21, 2006 9:55 AM