Filter
Top Products
GETTING STARTED
14 EN
MasterPage: Left
Power-Linked Operation
When the Power Switch is set to “REC”, you can
also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
The language on the display can be changed.
(੬ pg. 22, 24)
1 Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2 Open the LCD monitor fully. (੬ pg. 18)
Set the recording mode to . (੬ pg. 13)
3 Press MENU. The Menu Screen appears.
4 Press 3 or 4 to select
“DISPLAY”, and press
SET or 2. The DISPLAY
Menu appears.
5 Press 3 or 4 to select
“LANGUAGE”, and press
SET or 2.
6 Press 3 or 4 to select
the desired language, and
press SET or 2.
7 Press MENU. The
Menu Screen closes.
NOTE:
Press 1 whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (੬ pg. 22, 24)
1 Perform steps 1 – 4 in “Language Settings”
on the left column.
2 Press 3 or 4 to select “CLOCK ADJ.”, and
press SET or 2. The date display format is
highlighted.
3 Press 3 or 4 to select the desired date
display format, then press SET or 2. Select from
“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
or “YEAR.MONTH.DATE”.
4 Press 3 or 4 to select the time display
format, then press SET or 2. Select from “24h”
or “12h”.
5 Set the year, month, date, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2. Repeat this step until you have input all the
settings.
NOTE:
Press 1 to return to the previous setting.
6 Press MENU.The Menu
screen closes.
1 Adjust the velcro strip.
● Before making the
adjustment, remove any
security tag that may be
attached to the velcro.
2 Pass your right hand
through the loop and grasp
the grip.
3 Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and Power Zoom Lever.
Be sure to fasten the velcro strip to your
preference.
Language Settings
BRI GHT
DISPLAY
LANGUAGE
DATE/T I ME
DEMO MODE
TIME CODE
ON SCRE EN
CLOCK ADJ .
BRI GHT
DISPLAY
LANGUAGE ENGLISH
FRANÇAIS
ESPAÑOL
POR T
U
GUÊS
DATE/T I ME
DEMO MODE
TIME CODE
ON SCRE EN
CLOCK ADJ .
Date/Time Settings
Grip Adjustment
CLOCK ADJ.
DISPLAY
MNTH
JAN
0:00
12006
24h
..
DATE YEAR..
O
GR-D350UC.book Page 14 Wednesday, October 19, 2005 1:51 PM