Filter
Top Products
62
EDITING
(Cont.)
TW
1
2
3
4
5
6
7
8
T I ME CODE
15: 55
TOTAL
09: 02
00: 25~02: 05
07:18~08: 31
03: 33~05: 53
09:30~13:15
15: 55~
~
~
~
P
B/W
P
IN
W
H
OUT MODE
:
9
PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the
beginning of the scene you want to edit and
press PAUSE.
10
ENGAGE VCR'S RECORD-PAUSE
MODE
Point the remote control toward the VCR's
front panel and press VCR RECORD/
STANDBY, or manually engage the VCR's
Record-Pause mode.
11
START EDITING
Press EDIT on the Docking Station. Editing
proceeds as programmed, right through to the
end of the last registered scene.
•If you selected a Fade/Wipe effect, it is active
between selected scenes during dubbing.
•If you selected a P.AE/Effect, it is active
during scenes while dubbing.
•When dubbing is complete, the camcorder
enters the Pause mode, and the recorder
enters its Record/Standby mode.
•If you don’t register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
12
STOP EDITING
Engage the Stop modes for the camcorder and
the recorder.
To make the R.A. Edit counter display disap-
pear, press R.A. EDIT ON/OFF on the remote
control.
NOTES:
●
When the editing cable is connected to the Pause
terminal during dubbing, make sure the remote
control is pointed at the recorder’s sensor, and
that the path between the two is unobstructed.
●
If, during dubbing, you press any button on the
camcorder, its Record/Standby mode is automati-
cally engaged.
●
Random Assemble Editing may not function
properly when using a tape including several
duplicated Time Codes. (
੬
pg. 21).
R.A.EDIT program screen
STOP
EDIT
RM-V708U
(provided)
VCR RECORD/STANDBY
EFFECT
EDIT IN/OUT
REW
FADE/WIPE
R.A. EDIT