3
Applications
Micro HD camera system can be used for following
application; Endoscope operation in OR.
(This system should only be operated by doctors or
authorized persons.)
Above application, the system can supply HD and SD
signals to HD/SD monitor for display and to HD/SD VTR
for recording/playback.
For the safe use of this equipment, always follow the guidelines described below.
Power connection:
1. To prevent damage to the product, make sure that it is
grounded properly and pay attention to its power polariza-
tion.
2. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.
3. Power Cord Protection
Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
Precautions on installing medical electrical
equipment (Safety and hazard prevention)
For the safe use of this equipment, be absolutely sure
to follow the guidelines below.
1. Leave installation of the Mobile Video Cart and the unit to
a specially trained service persons.
2. Be absolutely sure to use the optionally sold AA-V31U
isolation transformer.
The specifications for the AA-V31U is given on page 22.
3. There are openings in the equipment. Fire or electric shock
may result if liquid splashes inside one of these openings.
To prevent any possible problems, please set the cart in a
reasonable position and use carefully.
An example of using medical video cart.
Monitor Strap
• Do not use mobile cart when crossing a threshold or excessively thick carpet.
• Be extra careful when transporting this product with mobile cart. Sudden stops, excessive force, and travelling on
uneven surfaces may cause the product and cart to topple.
ATTENTION:
Follow and obey all warnings and instructions marked
on your product and its operating instructions. For your
safety, please read all the safety and operating instruc-
tions before you operate this product and keep this
booklet for future reference.
Electrical energy can perform many useful functions.
But improper use can result in potential electrical shock
or fire hazards. This product has been engineered and
manufactured to assure your personal safety. In order
not to defeat the built-in safeguards, observe the
following basic rules for its installation, use and servic-
ing.
Cart information
(1) Cart should meet with UL2601-1.
(2) Load capacity(Top)
• Please chose a video cart which maximum load
capacity is more than 45 kg.
(3) Two casters have brakes
• When using a mobile cart in OR, the two of the four
brakes should be set for safety after setting the
position of the cart.
(4) Important notice 1
• When using mobile video cart in OR, precautions to
avoid crossing over the power cord of the cart.
• When using a mobile cart in OR, precaution to avoid
power cord of the cart to be caught by foot or caster
of the cart should be taken.
(5) Important notice 2
• When mounting monitor on a mobile cart, we
strongly recommend the use of monitor strap for
safety.
Dear Customer,
Thank you for purchasing the MICRO HD CAMERA.
Before use, please read the safety information and
precautions contained in the following pages to ensure
safe use of your new MICRO HD CAMERA.
Importer’s name & address
J.P.C.: JVC PROFESSIONAL PRODUCTS COMPANY
1700 Valley Road, Wayne NJ 07470
TEL: (973) 317-5000
FAX: (973) 317-5030