JVC ENLYT1127-001A Camcorder User Manual


 
EN
33
USING MENUS FOR DETAILED ADJUSTMENT
ON
ISD
RETURN
OFF
IND CUTW
OFF
IDE MODEW
0
ADJ .
AUTO
LASH F
LASHF
OFF
ELE MACROT
OFF
ELF-TIMERS
OFF
S
5
NAMUA
L
SNAP MODE
Refer to “Snapshot (For Tape Recording)” ( pg. 29).
GAIN UP
OFF: Allows you to shoot dark scenes with no picture
brightness adjustment.
[AGC]: The overall appearance may be grainy, but the
image is bright.
AUTO : The shutter speed is automatically
adjusted (1/25 — 1/200 sec.). Shooting a subject in
low or poor lighting at 1/25 sec. shutter speed
provides a brighter image than in the AGC mode, but
the subject’s movements are not smooth or natural.
The overall appearance may be grainy. While the
shutter speed is being automatically adjusted, “
is displayed.
NAVIGATION
Refer to “NAVIGATION Function” ( pg. 21, 22).
MANUAL
The “ MANUAL” settings are effective only when the
Power Switch @ is set to “ ”.
DIS
OFF: To turn off this function.
[ON ]: To compensate for unstable images caused
by camera-shake, particularly at high magnification.
NOTES:
Accurate stabilisation may not be possible if hand shake
is excessive, or under the following conditions:
When shooting subjects with vertical or horizontal
stripes.
When shooting dark or dim subjects.
When shooting subjects with excessive backlighting.
When shooting scenes with movement in various
directions.
When shooting scenes with low-contrast backgrounds.
Switch off this mode when recording with the camcorder
on a tripod.
The “
” indicator # blinks or goes out if the Stabiliser
cannot be used.
SELF-TIMER
Refer to “Self-Timer” ( pg. 26).
5S
[OFF], 5S: Refer to “5-Seconnd Recording”
( pg. 26).
Anim.: Allows you to record a few frames only. By
using an inanimate object and changing its position
between shots, you can record the subject as though
it is moving ( pg. 26).
TELE MACRO
[OFF]: To turn off this function.
ON: Usually the distance to a subject where the lens
is in focus depends on the zoom magnification.
Unless there is a distance more than 1m to the
subject, the lens is out of focus at the maximum
telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx.
60 cm.
Depending on the zoom position, the lens may go
out of focus.
WIDE MODE
[OFF]: Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.
CINEMA : Inserts black bands at the top and
bottom of the screen. During playback on
wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9. 3 appears. When using this
mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, black bands are inserted at the
top and bottom of the screen and the image appears
like a letterboxed 16:9 movie.
The “CINEMA” mode is effective only when the
VIDEO/MEMORY Switch t is set to “VIDEO”.
SQUEEZE : For playback on TVs with an aspect
ratio of 16:9. Naturally expands the image to fit the
screen without distortion. 3 appears. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on 4:3
TVs/LCD monitor/viewfinder, the image is elongated
vertically.
The “SQUEEZE” mode is effective only when the
VIDEO/MEMORY Switch t is set to “VIDEO”.
D.WIDE (GR-DX300 only): 3 appears. The
zoom range is extended beyond the maximum optical
zoom wide angle range. This mode’s wide angle
setting is equivalent to using a 0.7X wide conversion
lens. Zooming is possible from 0.7X to 10X. This
mode is suitable for shooting in a small room.
The “D.WIDE” mode is effective only when the
VIDEO/MEMORY t Switch is set to “VIDEO”.
WIND CUT
[OFF]: Disengages the function which cuts down on
noise created by wind.
ON : Helps cut down on noise created by wind.
9 appears. The quality of the sound will
change. This is normal.
FLASH
Refer to “Snapshot Flash” ( pg. 25).
FLASH ADJ.
Refer to “Flash Brightness Adjustment” ( pg. 25).
[ ] = Factory-preset
(GR-DX300 only)
(GR-DX300 only)