Filter
Top Products
EN 47
DR Pro-Still (Wide Range Mode)
The camera can expand its apparent dynamic range by combining different exposures of an extremely high
contrast subject.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
1
Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2
Select “DR PRO S” with the MODE switch.
•“DR PRO S” appears on the LCD panel.
3
Confirm that the self timer is set to “1 second“.
4
Point the lens at the subject and half-press the
Shutter button.
•To display the image on the LCD screen
while shooting, press the DSP button.
5
Press the Shutter button all the way to take
the picture.
•The shoot standby lamp (green) goes off
when the shooting has finished.
NOTES:
●
Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
●
It takes a few seconds until the shooting finishes
because this mode uses the exposure twice. Do
not move the object and the camera until the
shooting finishes completely.
3
1
OFF
M
4
SET
V
2
4,5