JVC GC X 1 Digital Camera User Manual


 
78 EN
OFF
M
4
SET
V
1
2
Sending Image File to Computer
For details on the basic operation of Mac OS, refer to the instruction manual provided with your Macintosh
®
or Mac OS.
Preparation
Start Macintosh
®
.
Insert a Memory card in which there are files you want to send to a computer. ( pg. 22)
It is recommended to protect the important files in advance. ( pg. 52)
1
Turn the Power dial to “B”.
•Hold the Lock button down while turning the
Power dial.
2
Select “USB MODE” with the MODE switch.
•“USB MODE” appears on the LCD panel.
3
Connect the camera to the computer using
the provided USB cable. ( pg. 75)
•The “untitled” icon appears on the desktop of
the computer.
4
Double click on the “untitled” icon.
5
Double click on the “DCVI (video)” or “DCIM
(still picture)” folder.
6
Copy the necessary files from the “DCVI
(video)” or “DCIM (still picture)” folder to the
desktop of the computer.
•To copy a file in easy way, hold down the
“option” key while dragging the file to the
destination.
NOTES:
When a file is being accessed from a personal
computer, the flash standby lamp (red) will flash.
Never disconnect the USB cable while the flash
standby lamp (red) is flashing.
The personal computer is sometimes unable to
recognize the device that is connected via a USB
cable. Therefore, when the copy of files has been
finished, disconnect the USB cable and then
control the camera with the MODE switch, Power
dial, etc.
Sending a video by e-mail
You can easily send the copied video file as an
attachment through your normal e-mail system.
NOTE:
To open the video file which is sent by e-mail,
you need a JVC Video Decoder to expand the
compressed file. You can also download the JVC
Video Decoder at our website.
(http://www.jvc-victor.co.jp/english/download/
index-e.html)
SOFTWARE SECTION FOR Macintosh
®
(cont.)