Filter
Top Products
Procedures:
1. Get the camera ready. (Refer to “Getting Started”)
2
. Toggle on the [MODE] button to select the Video Clip Mode [ ].
3
. Adjust the Normal /Macro switch dial to either Normal or Macro to suit the distance of the subject.
4
. Press the shutter button to start recording.
5
. Press the shutter button again to stop recording.
6
. To continue shooting, repeat the above steps 4 to 5.
4. [Rec] icon
Appears when recording Video Clip to indicate that recording is in progress.
5. EV Level Indicator
Adjust the EV Level by EV & White Balance setting, and the adjusted value will be displayed.
[-2.0 - +2.0]
It is not displayed at default value [0].
6. White Balance Indicator
Adjust the White Balance by EV & White Balance setting, and the adjusted value will be displayed.
[]
It is not displayed at default value “AUTO”.
7. Battery Indicator
Battery Life > 40%
20% < Battery Life < 40%
10% < Battery Life < 20%
Battery Life < 10%. Status Led flash 5 sec and then power off.
8. Macro Indicator
It is displayed when the Normal /Macro switch dial is set to Macro .
When set to Macro, it is possible to focus the camera on the subject in the proximity of about 45 cm.
Shooting Basics