JVC GC-S1 Digital Camera User Manual


 
54 EN
ADVANCED OPERATION
(cont.)
PC Connection Operation
Picture Navigator Software (Provided)
Image data in the camera can be sent to the RS-232C port of a Windows
®
PC or to the modem port of a
Macintosh
®
or Mac OS-compatible computer.
5
Rotate the MENU Jog Dial to select “PC
MODE” and push it twice.
•The normal playback screen reappears.
6
On the computer, capture the desired images
and process them.
•The message “PC MODE” appears during
image transfer.
•We recommend turning the camera off after
transferring images.
NOTES:
During image transfer to the computer, only one
image should be displayed. If a menu screen or
index screen is displayed, transfer is impossible.
Before transferring image data from the computer
to this camera, be sure to select the “FINE”
Picture Quality mode, referring to “Picture Mode
Selection” (
pg. 17).
PLAY MENU
PLAY MODE
F I LE
CO
MM
. MODE
EX I T
CO
MM
. MODE
PC MODE
I R MODE
EX I T
PLAY MENU Screen COMM. MODE Setup Screen
1
Connect the PC jack of the camera to the
computer’s RS-232C port (Windows
®
), or to
its modem or printer port (Macintosh
®
).
2
Install the Picture Navigator software on your
computer.
3
Turn the Power Dial, while pressing its Lock
Button, to “
PLAY
” and push the MENU Jog
Dial.
•The PLAY MENU Screen appears.
4
Rotate the MENU Jog Dial to select “COMM.
MODE” and push the MENU Jog Dial.
•The COMM. MODE Setup Screen appears.