JVC GR DVL 200 Camcorder User Manual


 
38 EN
01 02 03
05
04
NEXT
06
<
DELETE
>
C
E
A
X
N
E
C
C
D
E
U
S
L
T
C
E
MENU
P
L
A
Y
O
F
F
Deleting Images
Previously shot images can be deleted either one at a time
or all at once.
1
Set the VIDEO/DSC Switch to , then set the
Power Switch to while pressing down the
Lock Button.
A stored image is displayed.
2
Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select and press it. DSC MENU
appears.
3
Rotate MENU/BRIGHT to select DELETE and press
it. The Sub Menu appears.
TO SELECT AN IMAGE BY BROWSING
IMAGES STORED IN MEMORY
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select SELECT and press
it. The DELETE Index Screen appears.
5
Rotate MENU/BRIGHT to move the green frame to the
desired image that you wish to delete and press it. An
appears above the selected image.
Repeat this procedure for all images that you wish to
delete.
To deselect an image, press MENU/BRIGHT again.
The disappears.
6
Rotate MENU/BRIGHT upward to select NEXT and
press it. The Deletion Confirmation Screen appears.
7
Rotate MENU/BRIGHT to select EXECUTE and
press it. DELETING IN PROGRESS appears. The
selected images are deleted and the normal playback
screen appears.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
TO DELETE ALL IMAGES
Before doing the following, perform steps 1 through 3 above.
4
Rotate MENU/BRIGHT to select ALL and press it.
The Deletion Confirmation Screen appears.
5
Rotate MENU/BRIGHT to select EXECUTE and
press it. DELETING IN PROGRESS appears. All the
images are deleted and the normal playback screen
appears.
To cancel deletion, rotate MENU/BRIGHT to select
CANCEL and press it.
NOTES:
Protected images (
pg. 37) cannot be deleted with the
above operation. To delete them, remove protection first.
Once images are deleted, they cannot be restored.
Check images before deleting.
Power Switch
MENU/BRIGHT Wheel
Lock Button
Display
DELETE Index
Screen
CAUTION:
Do not perform any other operation
(such as turning off the camcorder)
during deletion. Also, be sure to use
the provided AC Power Adapter/
Charger, as the memory may be
corrupted if the battery becomes
exhausted during deletion. If the
memory becomes corrupted initialise
it. (
pg. 39)
Deletion
Confirmation
Screen
PLAYBACK
Advanced Features For D.S.C. (cont.)
VIDEO/DSC Switch
(Open the LCD monitor
to access this switch.)