JVC GR DVL 200 Camcorder User Manual


 
EN63
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
30.
Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, DIS
and other functions that
cannot be used together are
selected at the same time.
31.
The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
32.
This is normal.
33.
The Power Switch is not set
to .
34.
The VIDEO/DSC Switch is
set to VIDEO.
The Power Switch is set to
or .
35.
Your TV has AV input
terminals, but is not set to its
VIDEO mode.
The cassette holder cover is
open.
36.
During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
37.
The speaker volume is too
great.
38.
————
30.
Re-read the sections
covering Fade/Wipe effects,
Programme AE with special
effects and DIS
( pg. 24, 26 28).
31.
————
32.
————
33.
Set the Power Switch to
( pg. 31).
34.
Set the VIDEO/DSC Switch
to .
Set the Power Switch to
.
35.
Set the TV to the mode
or channel appropriate
for video playback
( pg. 40, 41).
Close the cassette holder
cover ( pg. 10).
36.
————
37.
Turn the speaker volume
down ( pg. 31).
38.
Clean the video heads with
an optional cleaning
cassette ( pg. 75).
30.
The LCD monitor or
viewfinder indications
blink.
31.
Coloured bright spots
appear all over the LCD
monitor or the viewfinder.
32.
During recording, sound
cannot be heard.
33.
Play, Rewind and Fast-
Forward functions do not
work.
34.
Images in the built-in
memory cannot be played
back.
35.
The tape is moving, but
there is no picture.
36.
The LCD monitor image is
distorted.
37.
Images on the LCD
monitor are jittery.
38.
Blocks of noise appear
during playback, or there is
no playback picture and
the screen becomes blue.
CONTINUED ON NEXT PAGE