Filter
Top Products
EN53
DISPLAY
MAKE CONNECTIONS
Also refer to pg. 40 and 41.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control’s PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to “VIDEO”, then set the Power
Switch to “ ” while pressing down the Lock
Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen (੬ pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (੬
pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (੬ pg. 32). Or, press DISPLAY on the
remote control.
●
When connecting the cables, make sure to connect the
end with a core filter to the camcorder. The core filter
reduces interference.
●
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
●
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
To
Remote PAUSE
or R.A.EDIT
VCR
TV
To PAUSE IN
Editing cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
Connector
cover**
To AV
To JLIP/
EDIT
To S
Core filter
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
To AUDIO,
VIDEO*
and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch
S-Video cable
(provided with
GR-DVL200EK,
optional for
GR-DVL200EG)
If your VCR has the
SCART connector,
use the provided
cable adapter.
Audio/Video cable
[mini-plug to RCA
plug] (provided)
Core filter
CONTINUED ON NEXT PAGE