JVC GR-AX1010 Camcorder User Manual


 
22
+
02
+
06
06
RECORDING
Advanced Features (cont.)
Digital Image Stabilizer
This feature compensates for unstable images caused by
camera-shake, particularly noticeable at high
magnification.
ACTIVATE D. I. STABILIZER
1
Press D.I.STABILIZER. “ ” appears in the viewfinder.
•To switch off the Digital Image Stabilizer, press
D.I.STABILIZER. The indicator disappears.
NOTES:
Accurate stabilization may not be possible if hand
shake is excessive, or under the following conditions:
When shooting subjects with vertical or horizontal
stripes
When shooting dark or dim subjects
When shooting subjects with excessive backlighting
When shooting scenes with movement in various
directions
When shooting scenes with low-contrast
backgrounds
When the Slow Shutter function is activated
(
pg. 27), the Digital Image Stabilizer (DIS) cannot
be used. If you try to activate this function while DIS is
engaged, “ ” blinks, telling you that DIS has been
deactivated.
Switch off DIS when recording with the camcorder on
a tripod.
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
SELECT SHOOTING MODE
1
Set the Shooting Mode selector to “PRESET”.
BRIGHTEN IMAGE
2
Press + (maximum +06). The Exposure level
indicator appears in the viewfinder.
OR . . .
DARKEN IMAGE
Press (maximum –06). The Exposure level
indicator appears in the viewfinder.
When you want to return to the factory setting . . .
RESTORE INITIAL SETTING
3
Press + andsimultaneously. The standard setting is
immediately restored and the Exposure level
indicator disappears.
To brighten the image
To darken the image
+
D.I. STABILIZER
Power zoom switch
Exposure Level Indicator
Viewfinder
Shooting Mode Selector
D.I.S. Indicator