Filter
Top Products
30
Using Menu For Detailed Adjustment
This camcorder is equipped with Multi-Function Control,
an easy-to-use, on-screen menu system that simplifies
many of the more detailed camcorder settings.
SELECT SHOOTING MODE
1
Set the Shooting Mode selector to “PRESET”.
ACCESS MAIN MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press + or – to place the highlight bar on the desired
function.
MAKE SETTING
4
The setting procedure depends on the function you
select.
If you select Shift Zoom, Tele Macro, Gain Up,
Color Filter or Tape Length, . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears. Then go to step
8.
If you select Title or Date/Time, . . .
.... press NEAR to access the selection menu for
each function (Title – ੬ pg. 32; Date/Time –
੬ pg. 11).
If you select “Sub Menu”, . . .
.... press NEAR to bring up the Sub Menu screen.
Go to step 5.
SELECT FUNCTION AT SUB MENU
5
Press + or – to place the highlight bar on the desired
option, then press NEAR. The selected item begins
blinking.
CHANGE SETTINGS
6
Press + or – to change the displayed setting of the
selected function, then press FAR to enter your
choice. The selected item stops blinking.
CLOSE SUB MENU
7
Press FAR, and setting is complete. The Sub menu
screen disappears and the Main Menu screen
reappears.
•To go directly past the Main Menu screen to the
normal screen, press MENU.
CLOSE MAIN MENU
8
Press MENU. The normal screen reappears.
RECORDING
Advanced Features (cont.)
Tele Macro OFF
Gain Up AGC
Color Filter NOR.
Tape Length T30
Title
Date/Time
Sub Menu
Shift Zoom OFF
Interval Timer OFF
Rec Time OFF
JLIP ID NO. 07
Tally ON
PAUSE
ࡗ
Shooting mode selector
FAR
NEAR
MENU+
–
If any settings in the Main Menu have been
changed from the factory settings, this mark
appears in the viewfinder.
Sub Menu screen
Main Menu screen