Filter
Top Products
EN 17
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
1 Make sure the camcorder’s power is off.
2 Open the card cover ( ).
3 To load a memory card, firmly insert it with
its clipped edge first.
To unload a memory card, push it once.
After the memory card comes out of the
camcorder, pull it out.
● Do not touch the terminal on the reverse
side of the label.
4 Close the card cover.
NOTES:
● Some brands of memory cards are not
compatible with this camcorder. Before
purchasing a memory card, consult its
manufacturer or dealer.
● Before using a new memory card, it is
necessary to format the card. (੬ pg. 28)
Appears when there is a problem with a memory
card and its memory is corrupt, or it has not been
initialized. Initialize the memory card. (੬ pg. 28)
Appears when the camcorder does not recognize
the loaded memory card. Remove the memory
card once and insert it again. Repeat these
procedures until no indication appears. If the
indication still appears, the memory card is
corrupted.
You can record videos at 4:3 size and 16:9
size. By default, the camera is set to record
videos at the 16:9 size.
1 Set the Power Switch to “REC”.
2 Set the VIDEO/MEMORY Switch to
“VIDEO”. Each press 16:9 switches the screen
size.
On the LCD monitor:
On the viewfinder:
NOTE:
If you record videos in 16:9 size, the image may
appear to be slightly vertically stretched when
playing back on TV with the 4:3 screen.
(੬ pg. 32, 33)
Loading/Unloading A Memory
Card
PLEASE FORMAT
CARD ERROR!
Memory card
(Optional)
Card Cover ( )
Clipped edge
16:9 Wide Mode
16:9
16 : 9
4 : 3
16 : 9
4 : 3
GR-D771US_EN.book Page 17 Friday, December 15, 2006 9:08 AM