Filter
Top Products
34 EN
A
M
5S
OFF
P
L
A
Y
ON
ON
32kHz
06
5SSCENE
BEEP / TALLY
WIND CUT
SOUND MODE
ID NUMBER
RETURN
4
REC MODE
WIDE MODE OFF
ON
AGC
40X
SP
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
4
END
1
SELECT OPERATION MODE
First turn the Power Dial to “
M
”, “5S” or “ ”
while pressing down the lock button located
on the dial, make sure the LCD monitor is
open fully or the viewfinder is pulled out.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS SYSTEM MENU
Move the pointer and highlight bar to “TO
SYSTEM MENU” by rotating the Select Dial,
then press it. The System Menu appears.
4
SELECT FUNCTION
Place the pointer and highlight bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
System Menu
The System Menu allows you to set the following functions:
Scene, Beep/Tally, Wind Cut, Sound Mode and
ID numbers.
System Menu
5
SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press it, and the pointer and highlight bar
automatically move to “RETURN”.
•To set the parameters for a different function,
repeat steps 4 and 5.
6
CLOSE SYSTEM MENU
Press the Select Dial twice. Setting is complete
and the System Menu disappears.
Display
Recording Menu
Power Dial
RECORDING
Advanced Features (Cont.)
MENU button
Lock button
Select Dial