Filter
Top Products
EN
69
CONTINUED ON NEXT PAGE
• The cassette is in the wrong
position.
• The battery’s charge is low.
• The memory card is in the wrong
position.
• The Squeeze mode is selected.
• The light source or the subject does
not include white. Or there are
various different light sources
behind the subject.
• The Sepia or Monotone mode is
activated.
• Shooting was performed under
backlit conditions.
• The subject is too bright.
• 10X optical zoom is selected.
• The VIDEO/MEMORY Switch is set
to “MEMORY”.
• The Sepia or Monotone mode is
activated.
• When shooting in the dark, the unit
becomes highly sensitive to light
and the image takes on an effect
similar to Slow Shutter.
• The Sepia or Monotone mode is
activated.
• Set it in the right position
(
੬ pg. 12).
• Install a fully charged battery
(
੬ pg. 8, 9).
• Set it in the right position
(
੬ pg. 14).
• Disengage the Squeeze mode
(
੬ pg. 46).
• Find a white subject and compose
your shot so that it also appears in
the frame (
੬ pg. 26, 40).
• Turn off Sepia and Monotone
(
੬ pg. 36, 37).
• Press the BACKLIGHT Button
(
੬ pg. 42).
• Set “PROGRAM AE” to
“SPOTLIGHT” in the Menu Screen
(
੬ pg. 36).
• Set “ZOOM” to “40X” or “700X” in
the Menu Screen (
੬ pg. 45).
• Set the VIDEO/MEMORY Switch to
“VIDEO” (
੬ pg. 17, 18).
• Turn off Sepia and Monotone
(
੬ pg. 36, 37).
• If you want the lighting to look
more natural, set GAIN UP to
“AGC” or “OFF” in the Menu
Screen (
੬ pg. 45).
• Turn off Sepia or Monotone before
setting White Balance (
੬ pg. 37,
43).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
6 The cassette will not load
properly.
7 The memory card will not
load properly.
8 Snapshot mode cannot be
used.
9 The color of Snapshot looks
strange.
0 The image taken using
Snapshot is too dark.
! The image taken using
Snapshot is too bright.
@ Digital Zoom does not work.
# The Black & White Fader
does not work.
$ Even when Slow Shutter is
not selected, the image
looks like it is activated.
% White Balance cannot be
activated.