Filter
Top Products
EN33
4
NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME
TAPE LENGTH
4
RETURN
AUTO
ON
OFF
T45
AUTO
:
FINE
:
CLOUD
:
HALOGEN
MWB
EXIT
M.W.B.
Manual White Balance Operation
If the camera is operating in PRO. mode, perform a
Manual White Balance when shooting under various types
of lighting.
1
SELECT OPERATION MODE
Follow steps 1 through 4 of the white balance
adjustment (੬ pg. 32), and select “MWB”.
2
SET MANUAL WHITE BALANCE
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
3
ENTER SETTING
Press the Select Dial until “MWB” begins blinking.
•When the setting is completed, “MWB” stops
blinking, and the Menu Screen reappears with the
highlight bar on “RETURN”.
4
CLOSE MENU SCREEN
Press the Select Dial again to close the Menu Screen.
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.
NOTES:
●
In step 2, it may be difficult to focus on the white paper
in some circumstances. In such a case, adjust focus
manually (
੬
pg. 31).
●
A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the colour temperature is different
depending on the light source, the tint of the subject will
differ depending on the white balance settings. Use this
function for a more natural result.
●
Once you adjust white balance during Manual White
Balance operation, the setting is retained even if the
power is turned off or the battery removed.
White paper
Menu Screen
Display
Power SwitchSelect Dial
M.W.B. Menu