JVC GZ-MS120BU Camcorder User Manual


 
39
ENGLISH
FURTHER
INFORMATION
Indication Action
SET DATE/TIME!
Set the clock. If the message still appears after setting the clock,
the battery for the clock has been depleted. Consult your nearest
JVC dealer.
COMMUNICATING ERROR
Be sure to use JVC battery packs.
NOT FORMATTED
Select [OK] and select [YES] to perform formatting.
FORMAT ERROR!
Check the operating procedure, and perform once again.
Turn off the camcorder, and turn it on again.
DATA DELETION ERROR
MEMORY CARD ERROR!
Turn off the camcorder, and turn it on again.
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
Remove any dirt from the SD card terminals.
Insert the SD card before switching the power on.
If the problem persists, backup all data, and then perform
formatting. (All data is deleted).
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
Stop video recording, and then record a still image. (If an SD
card is removed or inserted during video recording, a still image
cannot be recorded.)
RECORDING CANCELLED
Insert a new or formatted SD card. Set [VIDEO SLOT
SELECTION] to different slot, then record to an SD card in
[SLOT A] or [SLOT B].
Turn off the camcorder and turn it on again.
RECORDING FAILURE
Turn off the camcorder, and turn it on again.
USE AC ADAPTER
Use the AC Adapter as power supply.
Warning Indications
GZ-MS120US_IB_EN.indb 39 12/16/2008 6:44:49 PM