JVC GC-QX5HD Digital Camera User Manual


 
EN 35
1
Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2
Press the IRIS button, and then press the w e
button within 3 seconds.
•Press the w e button repeatedly to cycle
through the following modes:
PROGRAM F2.8/3.8 F5.6 F8 F11
PROGRAM
•The F value is the iris value, which controls
the amount of light that reaches the camera’s
image sensor.
•Smaller the F value is, faster the shutter speed
becomes. Larger the F value is, slower the
shutter speed becomes.
•Larger the F value is, deeper the depth of
field becomes.
•In PROGRAM mode, the iris value and the
shutter speed are calculated and set auto-
matically by the camera.
3
Point the lens at the subject, position yourself,
and half-press the Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DISPLAY button.
4
Press the Shutter button all the way to take
the picture.
NOTE:
When shooting a night scene, select “ ” for
“W. BALANCE”. (
pg. 38)
2
1
OFF
M
4
SET
V
3,4
Iris Setting
You can adjust the depth of field and the shutter speed by setting the F value manually.
3