Filter
Top Products
72 EN
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
32.
•During playback of the
unrecorded portion, High-
speed Search and still
playback, viewfinder
indications appear distorted.
This is not a defect.
33.
————
34.
•A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
35.
•The temperature of the
battery is extremely high/low.
•Charging is difficult in places
subject to extremely high/low
temperatures.
36.
•This occurs when recording
in the LP mode is not
available. After the indicator
blinks, the recording mode
switches to “SP” and
recording goes on.
37.
•This is not a malfunction.
32.
————
33.
•Check the section of the
manual that explains the
viewfinder indications
(੬ pgs. 77 – 79).
34.
•Remove the power supply
(battery pack, etc.) and press
RESET button, and wait a few
minutes for the indication to
clear. When it does, you can
resume using the camcorder.
If the indication remains even
though you repeat the above
two or three times,
please consult your nearest
JVC dealer.
35.
•To protect the battery, it is
recommended to charge it
in places with a temperature
of 10°C to 30°C (
੬ pg. 9).
36.
————
37.
•By recording with Digital
Image Stabilizer set to “ON”
(੬ pg. 30) this can be
avoided.
32.
The viewfinder indications
are distorted.
33.
An unusual mark appears
in the viewfinder.
34.
An error indication
(E01 — E06) appears in
the viewfinder.
35.
The charge indicator on
the AC Charger Station
does not light.
36.
The recording mode
indicator “LP” blinks in
the viewfinder.
37.
When the image is printed
from the printer, a black
bar appears at the bottom
of the screen.
TROUBLESHOOTING
(Cont.)