Filter
Top Products
74 EN
CONTROLS, INDICATIONS AND CONNECTORS
1
2
3
5
6
4
#
%
$
8 9 0 ! @
7
Connector cover
Pull this out to open.
Camcorder
1 Stereo microphone
For use when recording.
2 Lens hood
Turn this counterclockwise to release.
3 Lens cover
Opens when the viewfinder is pulled out with
the Power Dial set to any position except
“PLAY” or “OFF”.
4 Tally lamp
Lights during recording.
5 Remote sensor (੬ pg. 48)
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
6 Camera sensor
Be careful not to cover this area; built-in here is
the sensor necessary for shooting.
7 SNAPSHOT button (੬ pg. 26)
Press when taking a snapshot.
8 Stop button (5) (੬ pg. 46)
Stops playback of the tape.
9 Play/Pause button (6/
4
) (੬ pg. 46)
Plays back or stops the tape temporarily.
0 Rewind button (
2
) (੬ pg. 46)
Rewinds the tape.
! Fast-Forward button (
3
) (੬ pg. 46)
Fast-Forwards the tape.
@ Reset button (੬ pg. 72)
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
# External stereo microphone input
connector (MIC) (
੬ pg. 66)
If an optional microphone is connected, the
built-in microphone is disabled.
$ Video/audio output connector or head-
phones connector (
/AV-OUT)
(
੬ pg. 52)
The provided VIDEO/AUDIO cable (ø3.5) can
be connected to a television etc. Using optional
headphones, you can listen to the sound.
However, headphones equipped with volume
control cannot be used.
% DV OUT connector (i.Link*)
(
੬ pg. 56, 59)
Connect a video unit equipped with a DV
connector.
*i.Link refers to the IEEE 1394-1995 industry
specification and extensions thereof. The
logo is used for products compliant with the
i.Link standared.