Filter
Top Products
EN 73
1
REMOVE POWER SUPPLY
Remove the battery pack or disconnect the AC
Charger Station (੬ pg. 8 – 10).
2
CLEAN EXTERIOR
Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
3
CLEAN LENS
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
4
PULL OUT VIEWFINDER
Pull out the viewfinder fully.
AFTER USE
5
CLEAN VIEWFINDER
Slide the cover in the direction of the arrow 1 .
Insert a lens blower or a soft cloth into the gap
at the bottom of the viewfinder and clean the
interior of the viewfinder with it 2.
6
PUSH VIEWFINDER BACK IN
Slide the cover back to its original position and
push the viewfinder back in.
NOTES:
●
Avoid using strong cleaning agents such as
benzine or alcohol. This may damage the unit's
body or cause malfunction.
●
When using a cleaner or chemically treated cloth
refer to the cautions of each product.
Cleaning The Camcorder
2
1
Battery cover
Bottom of viewfinder
Battery pack
Open switch (BATTERY)
Gap