JVC LYT0844-001A Camcorder User Manual


 
EN47
5
S
5
S
OFF
ANIM.
FOR RECORDING
5-Second Recording
Record a vacation or an important event in 5-second clips
to keep the action moving. This function is available only
for video recording.
1
Set the VIDEO/MEMORY Switch to VIDEO, then
set the Power Switch to while pressing down
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press MENU. The Menu Screen appears.
3
Press + or to select MANUAL, and press SET/
SELECT. The MANUAL Menu appears.
4
Press + or to select 5S, and press SET/SELECT. The
Sub Menu appears.
5
Press + or to select 5S, and press SET/SELECT.
Selection is complete. Press + or to select RE-
TURN, and press SET/SELECT twice to close the
Menu Screen.
•“5S appears.
6
Press the Recording Start/Stop Button. The tally lamp
lights and beep sounds to indicate the start of
recording, and after 5 seconds the camcorder enters
Record-Standby mode.
Even if you press the Recording Start/Stop Button
again within 5 seconds after recording starts,
Record-Standby mode is not engaged.
7
To exit the 5S mode, select OFF in step 5.
To Take A Snapshot In The 5-Second Recording Mode . . .
.... instead of pressing the Recording Start/Stop Button in
step 6, select the desired Snapshot mode in the Menu
Screen, then press SNAPSHOT. The camcorder
records a 5-second still ( pg. 52). When 5S is set
to ANIM. ( pg. 41) this function is not available.
NOTE:
When 5S is set to ANIM. in the Menu Screen the
5-second recording mode is not available. Animation
recording of a few frames only is taken instead (
pg. 41).
Display
MANUAL Menu
Power Switch
Lock Button
MENU Button
Recording Start/
Stop Button
VIDEO/MEMORY
Switch
SNAPSHOT Button
SET/SELECT
Button
+, Button