Filter
Top Products
EN7
How To Attach The Strap
1 Thread one end of the strap through the
eyelet, then pass the other end through the
loop.
2 Attach the screw to the tripod mounting
socket. To tighten the screw firmly, use a
coin, etc.
3 Adjust the length with the adjuster.
NOTES:
●
You can use the strap as a shoulder strap by
adjusting the length with the adjuster.
●
Because a loose screw may cause damage to the
camcorder, make sure to tighten the screw firmly to
the tripod mounting socket when carrying the
camcorder.
●
Use the strap only with this camcorder.
●
Do not grip the camcorder too firmly when the
screw is attached. Doing so may cause damage to
the tripod mounting socket.
1
2
3