Filter
Top Products
BASIC OPERATIONS
EN 23
BASIC OPERATIONS
MasterPage: Basic_Right
1 Set the power switch to while pressing down the
lock button located on the switch.
2 Press MODE to select .
● A still image is displayed.
● To switch the medium to be played back, see pages 26 and
27.
3 Press
3
to display the previous file. Press
5
to
display the next file.
To turn on/off the on-screen display / To check the file
information
Press INFO repeatedly.
To select the file on the index display
Slide the zoom lever to W so that the index display
appears. Then press rtw e to select the file and press
49.
NOTES:
● Images shot and stored on the recording media with another
device may not be played back correctly.
● You can zoom in/out or rotate still images. For details, read
the advanced operation manual. (੬ pg. 32)
You can playback all the images stored in recording media
automatically.
1 Perform steps 1 – 2 in the left column.
2 Press 49 to start the slide show.
● If you press t during the slide show, files are displayed
in descending order.
● If you press r during the slide show, files are displayed
in ascending order.
● To end the slide show, press 49 again.
Deleting Still Image Files
Press , then press rt to select [EXECUTE] and press
49.
● You can select the desired file to be deleted by pressing w
e.
● To delete multiple files at once, see pages 26 and 29.
Still Image Playback
Power Switch
Lock Button
MODE
3
5
49
Zoom Lever
INFO
Slide Show
To display the next
image
To display the
previous image
Slide Show
Normal Playback
GZ-MC100PAL.book Page 23 Tuesday, December 28, 2004 1:04 PM