Filter
Top Products
E-2
Safety Precautions
FOR USA AND CANADA
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash wish arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the pres-
ence of uninsulated “dangerous volt-
age” within the product's enclosure that
may be of sufficient magnitude to con-
stitute a risk of electric shock to per-
sons.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important op-
erating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with
Canadian ICES-003.
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-
CUTION, NE PAS EXPOSER
L’APPAREIL A L’HUMIDITE OU A
LA PLUIE.
INFORMATION FOR USA
Cet appareil numérique de la Class B est
conforme á la norme NMB-003 du Canada.
INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmfull interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment
and receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
CHANGES OR MODIFICATIONS NOT
APPROVED BY JVC COULD VOID USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
E-3
English
Introduction
Contents
Introduction
Features ............................................ 3
Contents ............................................ 3
Safety Precautions ............................ 4
Operating Precautions ...................... 5
Names and Operations of Parts ....... 6
Body Surface ................................ 6
Body Underside ............................ 8
Installation and connection
System diagram ................................ 9
About Connection Cables ............... 10
Mounting the Camera to the
Ceiling...............................................11
When installing the Dome camera to
the electrical box ............................. 13
Connection for Adjustment of the
Camera............................................ 14
Adjusting the Lens and Camera
Angle ............................................... 14
Others
About White-spot correction............ 16
Specifications .................................. 17
Thank you for purchasing this product.
(These instructions are for TK-C205U and TK-C205E)
Features
Ⅲ The camera uses a high-resolution
380,000 pixel (U type) / 440,000 pixel
(E type), high-sensitivity CCD to
realize high picture quality with
horizontal resolution of 535 TV lines
and S/N 50dB.
Ⅲ Dome-type design allows application
in various locations.
Ⅲ Built-in backlight compensation
feature to improve the quality of video
taken under backlight conditions.
Ⅲ A 4inch square electrical box
compatible
Ⅲ The camera can be set to automati-
cally switch the image to black and
white mode when the brightness of
the subject decreases. This feature
is useful for monitoring in darkness.