Filter
Top Products
E-14
Ⅲ Horizontal rotation
(adjustable range: 120°)
1.
Loosen the horizontal LOCK screw.
2.
Holding the both tilt lock screws, rotate
horizontally.
3.
Tighten the horizontal LOCK screw.
Ⅲ Vertical rotation
(adjustable range: +80°, –50°)
1.
Loosen the tilt lock screws.
2.
Holding the rotation levers, rotate
vertically.
3.
Tighten the tilt lock screws.
Connection for Adjustment of the Camera
* The power to the camera body must be ON when adjustments are performed.
Setting switch
IRIS LEVEL
Volume
Adjustment
button
75Ω
termination
disconnected
Monitor TV
Adjusting the Lens and Camera Angle
Installation and connection
Variable range120°
Tilt lock
screws
Horizontal
Lock screw
Vertical rotation
The MONITOR terminal is used when making various adjustments to the camera at installa-
tion.
Camera angle, zoom and focus are adjusted.
E-15
English
Ⅲ Image inclination
(adjustable range: ±15°)
Manipulate the rotation levers to adjust the
inclination of the image.
Ⅲ Adjusting the iris level
This adjustment only needs to be made
when required.(੬ page 6)
Ⅲ Adjusting the image size
1.
Turn the securing screw of the focal
adjustment ring counterclockwise.
2.
Adjust the focal length.
3.
Turn the securing screw clockwise to
secure the focal adjustment ring.
Ⅲ Adjusting the focus
Adjust using the focus ring.
1.
Set the FOCUS ADJ. switch to “ON”.
The aperture is opened, decreasing the
depth of field, making it easier to ad-
just the focus.
2.
Adjust the focus.
* Repeat steps 1 to 3 of “Adjusting the
image size” and “Adjusting the focus”.
3.
After adjustment is complete, set the
FOCUS ADJ. switch to “OFF”.
Ⅲ Attach the dome cover.
Set the dome cover to the unit by aligning
the 3 marks on the camera and dome
cover (I, II and III). Be sure a click is heard.
Rotation levers
Focus ring
FOCUS ADJ.
switch
( ੬ page 6)
Focal length
adjustment
ring
IRIS
LEVEL
CAUTION:
Be sure that the dome cover is firmly at-
tached. Improper attachment could result
in the cover dropping down.