Filter
Top Products
10
Introduction
Camera (continued)
G
Base
Mount the base to the ceiling, wall or electrical
box before mounting the camera.
(A Pg. 21)(A Pg. 31)
H Fastening Screw for Dome Cover
This is a fastening screw for the dome cover.
Use a supplied wrench to fasten/unfasten the
screw.
I AC 24 V/DC 12 V Power Supply Wire
DC 12 V Input: Red (+12 V), Black (GND)
AC 24 V Input: Nonpolar
Note:
● In order to use the optional heater unit sold
separately (part number KA-ZH215) with this
camera an AC 24 V power supply MUST be
use.
● The AC 24 V power supply should conform to
the following:
U-type: Class 2 only
E-type: Isolated power supply only
● For inquiries on the heater, consult your
nearby JVC dealer.
J Alarm signal cable
(TK-C215VP12U/E only)
Yellow (ALARM IN), Gray (ALARM GND).
(A Pg. 18)
K Protection Cover
Upon connecting the video cable please protect
the BNC connection using this rubber cover.
L Video signal output connector (BNC)
(A Pg. 17)
Name of Parts (continued)
G
L
K
J
H
I
TK-C215VP12U/E only
TK-C215VP4_JP.book Page 10 Thursday, November 2, 2006 10:51 AM