Filter
Top Products
31
POSITION FUNCTION SET Screen (Continued)
Item Initial Value
This screen sets the configurations of functions relating to pictures taken in preset positions.
FACTORY SETTINGS screen
This screen resets values to their factory settings.
Item
FACTORY
SETTINGS
Initial Value
–
Function & Setting
Resets all settings in the above menus to their initial factory settings. Pressing the
SET button displays “EXECUTING” (about 15 seconds) and resets the settings to
the factory settings.
CANCEL : Does not alter current values.
CLEAR (W/O POS. TITLE) : Resets the settings to the initial, factory settings.
However, the set positions, the setting data of each
position and the titles are not reset to the factory set-
tings.
CLEAR (ALL) :
Resets all settings including titles and stored positions.
Function & Setting
W. BALANCE
R-B GAIN
M-G GAIN
Determines the setting of the white balance adjustment. The white balance can be
adjusted for lighting conditions with color temperatures from 2500K to 8000K.
ATW :Auto-Tracking White balance mode, adjusts the white balance automati-
cally according to the color temperature of the lighting conditions.
When ATW is set, “---“ is displayed for the items “R-B GAIN” and “M-G
GAIN”, so that the color phase adjustment cannot be carried out.
AWC :Auto White Control mode, which displays “PUSH SET A ADJ. STRAT”.
When the SET button is pressed, AWC is activated and thet white balance
adjustment starts.
If the AWC is activated while the screen is B&W the LOW LIGHT ERROR
will be displayed. This is not abnormal.
Adjusts the phases of R (Red) and B (Blue) under AWC mode.
• To enhance blue:Decrease the value.
• To enhance red :Increase the value.
Setting values : 0 to 255
Adjusts the phases of M (Magenta) and G (Green) under AWC mode.
• To enhance green : Decrease the value.
• To enhance magenta : Increase the value.
Setting values : 0 to 255
ATW
95
63